How To Use Space-Plug
With Space-Plug, you decide, how many and where to place your fixings. We recommend at least one per single base unit and two in most double units. Make sure you have the correct drill bits (a 200mm multipurpose bit that will drill the cabinet and masonry in one take is ideal) and a suitable length and type of fixing as is appropriate.
Get Your Hole
With the cabinet in its final position, drill a pilot hole (same size as your masonry bit) through the cross-brace, then, drill directly into the wall behind and insert your wall-plug.
Thread The Screw
With your Space-Plug wound together so that it’s smaller than the gap to be bridged, pass a screw through the cross brace, through the Space-Plug and locate it into the still visible wall-plug.
Bridge The Gap
Unwind the Space-Plug until it firmly contacts both
Tighten up the screw. You now have a solid and accessible fixing.